If you Do not Understand Laser Cutting Machine Coaxiality Debugging How to Adjust

We all know that the coaxiality of the nozzle and the laser beam is an important factor affecting the quality of the cut.

If they are not the same axis, it will affect the cutting effect, and in serious cases, it will cause the nozzle to heat up and burn.

and burned. Here we look at the laser cutting machine coaxial debugging methods

Coaxial debugging mainly refers to the adjustment of the nozzle hole and the laser beam coaxiality, to ensure that the center of the nozzle and the laser beam center in the same line. From the cross-section of the past, it is concentric circles.

The coaxiality of the nozzle aperture and the laser beam is one of the important factors affecting the quality of cutting. If the laser cutting machine nozzle hole and the laser beam is not the same axis, the cutting quality will have the following aspects of the impact:

1, affect the cutting section

Affect the quality of the sharp corners

Affect the perforation

Equipment coaxiality should be how to test debugging? Coaxiality testing methods

Nozzle: Size 1.2mm Tools: transparent tape paper

Methods: 1, focus 0 at the adjustment of coaxial, so that the laser is in the center of the nozzle 2, focus +6mm at the point of light; 3, if the focus of 0 and t6mm light point are in the center of the nozzle, it is normal.